https://oddformauto.de5.net/applications/Recent content in Odd-Form Insertion Applications on OddFormAuto by Southern MachineryHugoen-UShttps://oddformauto.de5.net/applications/connectors-terminals/Thu, 13 Aug 2026 00:00:00 +0000https://oddformauto.de5.net/applications/connectors-terminals/<h2 id="application-overview">Application overview</h2> <p>Connectors and terminals may be candidates for odd-form insertion automation when their geometry, leads, packaging and PCB conditions can be handled consistently. Different part numbers can have different keying, locking features, housings, pin patterns and acceptable contact areas, so suitability is evaluated part by part.</p> <h2 id="packaging-and-feeding">Packaging and feeding</h2> <p>Incoming packaging may include tape, tube, tray or bulk formats. The actual packaging condition must be confirmed rather than assumed from the component family. Engineering evaluates singulation, orientation, the pickup datum, lead protection and presentation at the machine interface before selecting a feeding route.</p>https://oddformauto.de5.net/applications/relays-switches/Thu, 13 Aug 2026 00:00:00 +0000https://oddformauto.de5.net/applications/relays-switches/<h2 id="application-overview">Application overview</h2> <p>Relays and switches may be candidates for odd-form insertion automation, but housings, terminals, actuation features, polarity or keying and acceptable handling areas vary by part. Evaluation begins with the actual part number and representative samples.</p> <h2 id="packaging-and-feeding">Packaging and feeding</h2> <p>The parts may arrive in tube, tray, tape or bulk packaging. Engineering reviews the supplied orientation, separation method, housing contact limits, terminal protection and required presentation point. A standard, bowl or flexible, or customized route is considered only after these conditions are understood.</p>https://oddformauto.de5.net/applications/power-components/Thu, 13 Aug 2026 00:00:00 +0000https://oddformauto.de5.net/applications/power-components/<h2 id="application-overview">Application overview</h2> <p>Selected capacitors, inductors, fuse holders and related through-hole power components may be candidates for insertion automation. Evaluation must account for body size and weight, lead geometry, polarity or orientation, acceptable handling surfaces and the required seated condition on the PCB.</p> <h2 id="packaging-and-feeding">Packaging and feeding</h2> <p>Incoming parts may be taped, tray-packed, tube-packed or supplied in bulk. Packaging details influence singulation, orientation, lead protection and presentation. Engineering compares the real packaging and samples with possible standard, bowl or flexible, and customized feeding routes.</p>https://oddformauto.de5.net/applications/large-components/Thu, 13 Aug 2026 00:00:00 +0000https://oddformauto.de5.net/applications/large-components/<h2 id="application-overview">Application overview</h2> <p>Large connectors, sockets, terminal blocks, selected transformers and other non-standard through-hole parts may require project-specific feeding, end tooling and PCB support. Their inclusion on this page is an evaluation category, not confirmation that every component in the family can be automated.</p> <h2 id="packaging-and-feeding">Packaging and feeding</h2> <p>Packaging may use trays, tubes, tape, dedicated carriers or bulk containers. Engineering reviews how the component is separated, oriented, supported and presented while protecting its body, leads and functional surfaces. A standard route may be unsuitable, so bowl or flexible and customized routes can be evaluated when the actual samples and packaging are available.</p>